Are 95A Skateboard Wheels Good for Beginners?

Introduction

If you're new to skateboarding and your feet feel like they're getting rattled loose every time you roll across rough pavement, you're probably wondering if your wheels are the problem.

A lot of beginners start on whatever setup they can get their hands on. Then reality hits.

The sidewalk feels terrible.

Cracks stop your momentum.

Rough asphalt kills your speed.

Your board feels like it's fighting you instead of helping you.

That's usually when people start searching:

• Are 95A skateboard wheels good for beginners?

• Should I get softer skateboard wheels?

• Are 95A wheels too soft?

• Are 99A wheels too hard for rough ground?

• What wheels make skating easier?

The good news is that wheel hardness can completely change how your setup feels.

For many beginners, a 95A wheel can be the sweet spot between comfort and performance.

It's soft enough to smooth out rough ground but still hard enough for real street skating, powerslides, and learning tricks.

If your current setup feels harsh, slow, or frustrating, there's a good chance your wheels are making the learning curve harder than it needs to be.

Quick Answer

Yes, 95A skateboard wheels are often beginner friendly.

They provide:

1. Better grip than harder wheels

2. More comfort on rough pavement

3. Smoother cruising between spots

4. Less vibration on asphalt

5. Easier overall control

For beginners learning street skating, 95A wheels often provide a more forgiving ride without feeling overly soft.

Many beginner skaters find 95A wheels offer the ideal balance of comfort, control, and real street skating performance on rough pavement.

Why Most Wheels Fail Beginners

Most beginner frustrations aren't caused by the skateboard itself.

They're caused by the wrong wheels.

A lot of complete setups come with wheels that are either:

• Too hard

• Made from cheap urethane

• Low rebound

• Poorly shaped

• Designed more for marketing than actual skating

Hard wheels can feel fine at the skatepark.

Take those same wheels onto rough asphalt and things change fast.

Every crack feels bigger.

Every pebble becomes an obstacle.

Every push loses momentum.

Instead of building confidence, you're spending the entire session fighting your setup.

Some beginners assume this is just how skateboarding feels.

It isn't.

Good wheels should help you learn, not punish you.

The Technical Breakdown

What Does 95A Actually Mean?

95A refers to durometer.

Durometer measures wheel hardness.

Higher numbers mean harder wheels.

Lower numbers mean softer wheels.

In general:

• 80A to 90A = cruising focused

• 95A = hybrid performance

• 99A to 101A = traditional street skating

A 95A wheel sits right in the middle.

That's why so many skaters find it versatile.

How 95A Feels on Rough Ground

This is where 95A really shines.

If you've ever skated rough parking lots, crusty sidewalks, or cracked asphalt, you know how miserable hard wheels can feel.

The board chatters.

Your feet vibrate.

Speed disappears.

A good 95A wheel absorbs more of that punishment.

The ride feels smoother.

Long pushes become easier.

The board carries speed better.

Instead of focusing on surviving rough ground, you can focus on learning.

Many beginner skaters choose 95A wheels because they provide a smoother ride on rough pavement while still delivering the control needed for real street skating.

Rebound Matters More Than Most Beginners Realize

A lot of skaters focus entirely on hardness.

But rebound is equally important.

Rebound is how well a wheel returns energy after compression.

Good rebound creates:

• Better roll speed

• More efficient pushes

• Smoother feel

• Better speed retention

Cheap wheels often feel dead.

They lose momentum quickly.

They make every push work harder than it should.

Good urethane feels lively.

You notice it immediately.

Wheel Shape Changes Everything

Shape affects:

• Wheel control

• Powerslides

• Grip

• Stability

• Setup feel

A well-designed wheel shape can make a board feel significantly more predictable.

That's important when you're learning basic skills.

You want consistency.

Not surprises.

Size Matters Too

For beginners:

50mm to 54mm tends to work well.

Larger wheels:

• Roll over cracks easier

• Maintain speed better

• Feel smoother

Smaller wheels:

• Accelerate faster

• Feel lighter

• Sit lower to the ground

Many newer skaters enjoy 54mm because it provides a nice balance.

Real Session Experience

Here's something you'll notice after switching from a harsh wheel to a quality 95A.

The session lasts longer.

Not because you're skating harder.

Because you're less exhausted.

Anyone who's pushed through rough parking lots knows the feeling.

Your feet get numb.

Your knees absorb constant vibration.

The board feels slow.

Then you swap wheels.

Suddenly rough pavement doesn't feel nearly as hostile.

You carry speed through rough sections.

Long pushes require less effort.

Learning manuals feels easier.

Cruising between obstacles becomes enjoyable.

That's not marketing.

That's setup feel.

And experienced skaters notice it immediately.

How the Skate Should Feel

The right beginner wheel should make skateboarding feel easier.

Not easier as in effortless.

Easier as in more enjoyable.

You should notice:

• Faster roll speed

• Better speed retention

• Less vibration

• More confidence

• Better wheel control

• Smoother landings

• Cleaner powerslides

• More comfortable cruising

• Less fighting the setup

The board should feel like it's helping you.

Not slowing you down.

If every crack feels catastrophic, your wheels may be part of the problem.

What to Look for in a High-Quality Beginner Wheel

• Quality urethane

• Good rebound

• Consistent roll speed

• Reliable grip

• Comfortable rough ground performance

• Durable construction

• Smooth setup feel

• Good wheel control

• Balanced hardness

• Confidence-inspiring ride

Why Full Moon Wheels Solve This Problem

Most beginner-friendly wheels focus entirely on softness.

The problem is that some become too soft.

You gain comfort but lose performance.

That's where many wheels miss the mark.

The Full Moon Vacationer 95A was built differently.

Instead of choosing between comfort and performance, it aims to balance both.

The result is a wheel that feels comfortable on rough pavement while still remaining capable during real street skating.

Most wheels feel great for cruising.

These are built for actual skate sessions.

Most wheels prioritize appearance.

These prioritize setup feel.

Most wheels either feel too hard or too soft.

These sit in that sweet spot many skaters are searching for.

The glow urethane is the obvious feature.

The ride quality is what keeps people skating them.

These aren't fresh out of the box. These Vacationer 95A wheels have been pushed through real street sessions, rough pavement, and night skating while still delivering strong glow and reliable performance.

👉 Upgrade to Full Moon Vacationer 95A Glow Wheels for Smoother Street Skating

Comparing Your Current Wheels

Ask yourself:

Do rough parking lots kill your speed?

Do your feet vibrate constantly?

Do long pushes feel exhausting?

Does rough asphalt make every session frustrating?

If the answer is yes, your current wheels may be holding your progression back.

A lot of skaters spend months trying to improve while riding setups that make learning harder.

Sometimes the problem isn't your skill.

Sometimes it's the wheels.

Who These Wheels Are For

You'll probably love 95A wheels if:

• You're a beginner

• You skate rough pavement

• You cruise between spots

• You skate parking lots

• You enjoy longer sessions

• You want smoother roll speed

• You value comfort and control

Who They Aren't For

You may prefer harder wheels if:

• You skate smooth parks exclusively

• You want maximum slide speed

• You prioritize technical competition setups

• You like extremely hard wheel feel

Being honest about this helps people buy the right setup.

Premium Buyer Positioning

The difference between average wheels and great wheels becomes obvious after enough sessions.

Good wheels don't just roll.

They improve the entire experience.

Better speed retention.

Better comfort.

Better confidence.

Better control.

The skaters who notice these things are usually the ones who stick with skateboarding long term.

They understand that wheel feel matters.

And once you experience a setup that works with you instead of against you, it's hard to go back.

Looking for More Glow Wheel Options?

If you're interested in glow urethane and want to compare different styles, check out our guide to the Best Glow in the Dark Skateboard Wheels for Street Skating.

You can also explore our roundup of the Best Glow in the Dark Skateboard Wheels 2027 for additional setup ideas and wheel comparisons.

One customer described the Vacationer 95A as “the perfect duro,” praising the wheel's conical shape, strong glow, and overall ride quality.

Looking for more glow wheel options built for actual street skating? Check out our guide to the Best Glow in the Dark Skateboard Wheels for Street Skating to compare Full Moon glow setups, wheel sizes, and night skating options.

Final Thoughts

For most beginners, 95A skateboard wheels are one of the safest and most versatile choices available.

They provide enough comfort for rough pavement.

Enough grip for confidence.

Enough performance for real street skating.

Most importantly, they make skateboarding more enjoyable.

And when sessions become more enjoyable, you skate more.

That's how progression happens.

👉 Prefer a smoother ride for rough pavement and longer sessions? Check out the Full Moon 95A Vacationer Glow Wheels.

If your current wheels make every crack, pebble, and rough patch feel miserable, upgrading your wheels may be the easiest improvement you can make to your entire setup.